40 CFR 1068.101 (4)(B)
Manufactured and Sold Expressly for Non-Road Vehicles Used Solely for Competition.
Racing, Modified Racing Exhaust Testing an Tuning Diagnostics ONLY.
Not sold For Use On Production Street Vehicles ("on road" or "on highway" vehicles)...

                   NOTE: SHIPPING:

1. This Item Is Delivered Via USPS First Class Mail, With Delivery Confirmation.

2. International Buyers, Click Here to add International shipping.

3. International orders can be subject to both delays and addional fee's, such as import duties, import fee's, taxes, etc. assessed by Customs, the buyer is responsible for all such costs. Big Daddies Garage is not responsible for delays caused by Customs allow 21 to 45 days for International delivery, unless Guaranteed Delivery Service is used.

4. We will Ship your Item Same Day (except Sat., Sundays, Holidays) immediately after payment is complete using PayPal.

5. PAYPAL...We will Ship only to your confirmed PayPal Address, Please do not ask for delivery to another destination, We will not do it.

6. Refunds on Orders Not Yet Shipped or Ordered in Error, carry a 1.00 US$ refund processing fee.

7. This Racing Item Is NON-RETURNABLE.

MADE FROM PREMIUM QUALITY 304 STAINLESS STEEL

NO RUSTING, NO SCALING,
NO CORROSION, NO PITTING,
NO BLISTERING, NO FLAKING,
NO RUST STAINS

This O2 Sensor Angled Cel Fix is made entirely from T 304 Stainless Steel, It is not ZINC PLATED CARBON STEEL like those sold by others on eBay. What you need to understand is that Zinc Plating begins to Blister and Flake at 320 degree's. Once this begins the Plating will fall off, or Blacken then Immediatly begins to Rust. Your Exhaust System will reach and Exceed 620 degree's and Remain at this Temperature While in Operation. Your O2 Sensor begins operating in closed loop at 600 Degree's and usually has a heated wire to reach this temperature quickly.

Below are 2 Comparisons...

T304 Premium Stainless Steel on the LEFT... Zinc Plated Carbon Steel on the RIGHT...
Notice the color difference...
Zinc Plating Is Easily Identified...
T 304 Stainless Steel Is Non Magnetic...

Please Note:
(1) This Does Not Fix A Defective O2 Sensor, Wiring or Heater Circuits.
(2) No...O2 Sensor Is Included In This Offer.
(3) Designed For Post Cat Sensor ONLY.
(4) Intended For Competitive Modified Exhaust Use Only.
(5) Do Not Use To Remove Cel Caused By Faulty Catalytic Converter!
(6) It is the buyers responsiblility to check and verify Fitment and Clearance issues.
(7) Thread Size...18MM X 1.5 , Fits all 18MM Threaded O2 Sensors both Wide and Narrow Band.

ABOVE: A picture of the Angled O2 Simulators once again, Filings from each are directly below them...

Notice On the LEFT T304 Stainless Steel Filings Absolutly NO RUST.    The Zinc Plated Filings on the Right COMPLETELY RUSTED...

This happens on the inside of the Carbon Steel Adapter also. When the inside becomes rusted.
Exhaust Contamination Buildup occurs causing the oxygen sensor's tip to become fouled and you throw the CEL again, it just keeps coming back.

You just Spent Several Hundred Dollars On Your Custom Exhaust... Why Put Cheap Carbon Steel Adapters On, When Premium Stainless Steel Is Available at an Afforable Price? Plus with Big Daddies O2 Simulator, No More Rust Stains on Those Expensive Stainless Steel or Chrome Pipes.

MADE TO THE EXACT DESIGN SPEC's
   OF THE ORIGINAL FAST EDDIE MOD.

304 Premium Stainless Steel Zinc Plated Carbon Steel
Notice in Above Picture:

Stainless Steel (left) " STILL " has the natural gray lusture...

Zinc plating removed (right) it's Cheap, Chinese Carbon Steel... TRASH... TRASH... TRASH.

304 Premium Stainless Steel    Zinc Plated Carbon Steel

                        Notice in Above Picture:

      Stainless Steel (left) has the natural gray lusture...

Zinc plating (right) has a shiney silver color, fake looking...

           Why Your Throwing A Cel !

You Finally Spent all that Hard Earned Cash and Installed A Test Pipe, High Flow Cat, Downpipe, or Modified High Performance Exhaust.

Well You also got Rid Of or Limited the Catalytic Converter Which Minimizes the Exhaust Pollutants. Those Post Cat O2's are Sniffing away and ratting you out to the ECU...is whats Happening. Nobody Told You About Throwing A CEL when Buying The Pipes Did They, Well they Didn't Tell Me Either

And I Spent Weeks and Weeks Putting Up With That Cel...UGH.

SO Now You Have the P0420 or P0430 CEL and It's NOT GOING AWAY...YEAH, I Know. Hundreds to Modify only to Get That Irritating Stinking Cel...

     NOW GET RID OF IT BY NSTALLING
   BIG DADDIES ANGLED O2 SIMULATOR .

               NOTE: SHIPPING:

1. This Item Is Delivered Via USPS First Class
     Mail, With Delivery Confirmation.

2. International Buyers, Click Here to add
     International shipping.

3. International orders can be subject to both
     delays and addional fee's, such as import
     duties, import fee's, taxes, etc. assessed by
     Customs, the buyer is responsible for all such
     costs. Big Daddies Garage is not responsible
     for delays caused by Customs allow 21 to 45
     days for International delivery, unless
    Guaranteed Delivery Service is used.

4. We will Ship your Item Same Day (except
    Sat., Sundays, Holidays) immediately after
    payment is complete using PayPal.

5. PAYPAL...We will Ship only to your
    confirmed PayPal Address, Please do not ask
    for delivery to another destination, We will
    not do it.

6. Refunds on Orders Not Yet Shipped or
    Ordered in Error, carry a 1.00 US$ refund
    processing fee.

7. This Racing Item Is NON-RETURNABLE.

ABOVE: A picture of the Angled O2 Simulators once again, Filings from each are directly below them...

Notice On the LEFT T304 Stainless Steel Filings Absolutly NO RUST.    The Zinc Plated Filings on the Right COMPLETELY RUSTED...

This happens on the inside of the Carbon Steel Adapter also. When the inside becomes rusted.
Exhaust Contamination Buildup occurs causing the oxygen sensor's tip to become fouled and you throw the CEL again, it just keeps coming back.

You just Spent Several Hundred Dollars On Your Custom Exhaust... Why Put Cheap Carbon Steel Adapters On, When Premium Stainless Steel Is Available at an Afforable Price? Plus with Big Daddies O2 Simulator, No More Rust Stains on Those Expensive Stainless Steel or Chrome Pipes.

      MADE TO THE EXACT DESIGN SPEC's
        OF THE ORIGINAL FAST EDDIE MOD.

304 Premium Stainless Steel Zinc Plated Carbon Steel
Notice in Above Picture:

Stainless Steel (left) " STILL "has the natural gray lusture...

Zinc plating removed (right) it's Cheap, Chinese Carbon Steel... TRASH... TRASH... TRASH.

T304 Premium Stainless Steel         Zinc Plated Carbon Steel
                        Notice in Above Picture:

      Stainless Steel (left) has the natural gray lusture...

Zinc plating (right) has a shiney silver color, fake looking...

MADE FROM PREMIUM QUALITY 304 STAINLESS STEEL

NO RUSTING, NO SCALING, NO CORROSION, NO PITTING, NO BLISTERING, NO FLAKING, NO RUST STAINS

This O2 Sensor Angled Cel Fix is made entirely from T 304 Stainless Steel, It is not ZINC PLATED CARBON STEEL like those sold by others on eBay. What you need to understand is that Zinc Plating begins to Blister and Flake at 320 degree's. Once this begins the Plating will fall off, or Blacken then Immediatly begins to Rust. Your Exhaust System will reach and Exceed 620 degree's and Remain at this Temperature While in Operation. Your O2 Sensor begins operating in closed loop at 600 Degree's and usually has a heated wire to reach this temperature quickly.

Below are 2 Comparisons...

T304 Premium Stainless Steel on the LEFT... Zinc Plated Carbon Steel on the RIGHT...
Notice the color difference... Zinc Plating Is Easily Identified... T 304 Stainless Steel Is Non Magnetic...

           Why Your Throwing A Cel !

You Finally Spent all that Hard Earned Cash and Installed A Test Pipe, High Flow Cat, Downpipe, or Modified High Performance Exhaust.

Well You also got Rid Of or Limited the Catalytic Converter Which Minimizes the Exhaust Pollutants. Those Post Cat O2's are Sniffing Away and Ratting you out to the ECU...is whats Happening. Nobody Told You About Throwing A CEL when Buying The Pipes Did They, Well they Didn't Tell Me Either

And I Spent Weeks and Weeks Putting Up With That Cel...UGH.

SO Now You Have the P0420 or P0430 CEL and It's NOT GOING AWAY...YEAH, I Know. Hundreds to Modify only to Get That Irritating Stinking Cel...

           NOW GET RID OF IT BY INSTALLING
       BIG DADDIES ANGLED O2 SIMULATOR .

Why Your Throwing A Cel ???

You Finally Spent all that Hard Earned Cash and Installed A Test Pipe, High Flow Cat, Downpipe, or Modified High Performance Exhaust.

Well You also got Rid Of or Limited the Catalytic Converter Which Minimizes the Exhaust Pollutants. Those Post Cat O2's are Sniffing Away and Ratting you out to the ECU...is whats Happening. Nobody Told You About Throwing A CEL when Buying The Pipes Did They, Well they Didn't Tell Me Either

And I Spent Weeks and Weeks Putting Up With That Cel...UGH.

SO Now You Have the P0420 or P0430 CEL and It's NOT GOING AWAY...YEAH, I Know. Hundreds to Modify only to Get That Irritating Stinking Cel...

NOW GET RID OF IT BY INSTALLING BIG DADDIES ANGLED O2 SIMULATOR .

The Nice Thing About Big Daddies Post Cat O2 Simulator Is..." it's NON-PERMANENT "

Requires NO MODIFICATION To The O2 SENSOR HARNESS...

Angled O2 Simulator Designed for Tight Fits and Allows Proper O2-Sensor Positioning from the Firewall...

EASY TO INSTALL...Just unscrew O2 Sensor, screw O2 Simulator into Exhaust, Screw Oxygen Sensor Into O2 Simulator...DONE

This will Eliminate the P0420 and P0430 code for 1996 and newer Vehicles... 98.9 % of the time.

Please Note:
(1) This Does Not Fix A Defective O2 Sensor, Wiring or Heater Circuits.
(2) No...O2 Sensor Is Included In This Offer.
(3) Designed For Post Cat Sensor ONLY.
(4) Intended For Competitive Modified Exhaust Use Only.
(5) Do Not Use To Remove Cel Caused By Faulty Catalytic Converter!
(6) It is the buyers responsiblility to check and verify Fitment and Clearance issues.

T304 Premium Stainless Steel Zinc Plated Carbon Steel

Notice in Above Picture:

Stainless Steel (left) has the natural gray lusture...

Zinc plating (right) has a shiney silver color, fake looking...

304 Premium Stainless Steel Zinc Plated Carbon Steel

Notice in Above Picture:

Stainless Steel (left) " STILL "has the natural gray lusture...

Zinc plating removed (right) it's Cheap, Chinese Carbon Steel...
TRASH...TRASH...TRASH.

ABOVE: A picture of the Angled O2 Simulators once again, Filings from each are directly below them...

Notice On the LEFT T 304 Stainless Steel Filings Absolutly NO RUST.    The Zinc Plated Filings on the Right COMPLETELY RUSTED...

This happens on the inside of the Carbon Steel Adapter also. When the inside becomes rusted...Exhaust Contamination Buildup occurs causing the oxygen sensor's tip to become fouled and you throw the CEL again, it just keeps coming back.

You just Spent Several Hundred Dollars On Your Custom Exhaust... Why Put Cheap Carbon Steel Adapters On, When Premium Stainless Steel Is Available at an Afforable Price? Plus with Big Daddies O2 Simulator, No More Rust Stains on Those Expensive Stainless Steel or Chrome Pipes.

                         MADE TO THE EXACT DESIGN SPEC'S OF THE ORIGINAL FAST EDDIE MOD.

                                                  NOTE: SHIPPING:

1. This Item Is Delivered Via USPS First Class Mail, With Delivery Confirmation.

2. International Buyers, Click Here to add International shipping.

3. International orders can be subject to both delays and addional fee's, such as
     import duties, import fee's, taxes, etc. assessed by Customs, the buyer is responsible for all such
     costs. Big Daddies Garage is not responsible for delays caused by Customs allow 21 to 45 days for
     International delivery, unless Guaranteed Delivery Service is used.

4. We will Ship your Item Same Day (except Sat., Sundays, Holidays) immediately after payment is
     complete using PayPal.

5. PAYPAL...We will Ship only to your confirmed PayPal Address, Please do not ask for delivery to
     another destination, We will not do it.

6. Refunds on Orders Not Yet Shipped or Ordered in Error, carry a 1.00 US$ refund processing fee.

7. This Racing Item Is NON-RETURNABLE.

T304 Premium Stainless Steel Zinc Plated Carbon Steel

Notice in Above Picture:

Stainless Steel (left) has the natural gray lusture...

Zinc plating (right) has a shiney silver color, fake looking...

304 Premium Stainless Steel Zinc Plated Carbon Steel

Notice in Above Picture:

Stainless Steel (left) " STILL "has the natural gray lusture...

Zinc plating removed (right) it's Cheap, Chinese Carbon Steel...
TRASH...TRASH...TRASH.

ABOVE: A picture of the Angled O2 Simulators once again, Filings from each are directly below them...

Notice On the LEFT T 304 Stainless Steel Filings Absolutly NO RUST.    The Zinc Plated Filings on the Right COMPLETELY RUSTED...

This happens on the inside of the Carbon Steel Adapter also. When the inside becomes rusted...Exhaust Contamination Buildup occurs causing the oxygen sensor's tip to become fouled and you throw the CEL again, it just keeps coming back.

You just Spent Several Hundred Dollars On Your Custom Exhaust... Why Put Cheap Carbon Steel Adapters On, When Premium Stainless Steel Is Available at an Afforable Price? Plus with Big Daddies O2 Simulator, No More Rust Stains on Those Expensive Stainless Steel or Chrome Pipes.

      MADE TO THE EXACT DESIGN SPEC'S OF THE ORIGINAL FAST EDDIE MOD.

                            NOTE: SHIPPING:

1. This Item Is Delivered Via USPS First Class Mail, With Delivery
     Confirmation.

2.   International Buyers, Click Here to add International shipping.

3. International orders can be subject to both delays and addional fee's,
     such as import duties, import fee's, taxes, etc. assessed by Customs,
     the buyer is responsible for all such costs. Big Daddies Garage is not
     responsible for delays caused by Customs allow 21 to 45 days for
     International delivery, unless Guaranteed Delivery Service is used.

4. We will Ship your Item Same Day (except Sat., Sundays, Holidays)
     immediately after payment is completed using PayPal.

5. PAYPAL...We will Ship only to your confirmed PayPal Address, Please
     do not ask for delivery to another destination, We will not do it.

6. Refunds on Orders Not Yet Shipped or Ordered in Error, carry a
      1.00 US$ refund processing fee.

7. This Racing Item Is NON-RETURNABLE.

MADE FROM PREMIUM QUALITY 304 STAINLESS STEEL

NO RUSTING, NO SCALING, NO CORROSION, NO PITTING, NO BLISTERING, NO FLAKING, NO RUST STAINS

This O2 Sensor Angled Cel Fix is made entirely from T 304 Stainless Steel, It is not ZINC PLATED CARBON STEEL like those sold by others on eBay. What you need to understand is that Zinc Plating begins to Blister and Flake at 320 degree's. Once this begins the Plating will fall off, or Blacken then Immediatly begins to Rust. Your Exhaust System will reach and Exceed 620 degree's and Remain at this Temperature While in Operation. Your O2 Sensor begins operating in closed loop at 600 Degree's and usually has a heated wire to reach this temperature quickly.

Below are 2 Comparisons...

T304 Premium Stainless Steel on the LEFT... Zinc Plated Carbon Steel on the RIGHT...
Notice the color difference... Zinc Plating Is Easily Identified... T 304 Stainless Steel Is Non Magnetic...